| |
TELEMECANIQUE
:
AUTOMATIONS
:
ALTIVAR
08
Frequency
converter for 3-Phase asynchronous motors :
Presentation
:
As
a frequency converter for 3-phase asynchronous squirrel cage motors and
single phase supply, the Altivar 08 incorporates the latest technological
developments. Robust and compact, conforming to international standards,
the Altivar 08 is a universal product. Created from our experience over
several generations of speed controllers, its functions meet the requirements
for the most up-to-date applications like :
- Horizontal Material
Handling : Conveyors etc.
- Packing & Packaging
: Gluing Machines, Labeling Machines etc.
- Special Machines
: Mixers, Printing Machines etc.
Versions
:
The Altivar 08 is
available in three versions for ease of integration into machines :
- ATV-08HUXXXX
standard speed controller with heatsink
- ATV-08PUXXXX
speed controller with base plate
- ATV-08EUXXXX
speed controller with IP 65 Enclosure
Electromagnetic
Compatibility (EMC) :
ATV
08 speed controllers are available with & without integrated EMC filters.
Incorporating filters into speed controller facilitates machine installation
and conformity of CE marking purposes at low cost.
Version
with EMC filters conforms to EN61800 - 3 / IEC 1800 - 3 public and industrial
supplies
Specifications
:
| Rated
input voltage |
200V
- 10% to 240 V + 10% single phase |
| Rated
input frequency |
50
/ 60 Hz ± 5% |
| Output
voltage |
3
phase max. voltage equal to input voltage |
| Output
frequency |
0.1 to 120 Hz |
| Over
torque capacity |
150%
of nominal motor torque (during transient) |
| Braking
torque |
50%
of normal motor torque |
| Control
inputs /outputs |
4
logic inputs + 1Analogue input, 1 changeover fault relay contact and
1 Open collector PWM type Analogue output at 1.2kHz |
| Acc./Dec.
time |
0.1-99
sec. (Programmable independently) |
| Switching
frequency |
4KHz |
| Motor
protection |
Over
load protection, over current protection |
| Speed
controller protection |
Short
circuit, over voltage, under voltage, over temp. |
| Standard
functions |
Preset
speeds, 2/3 wire control (pulse/sustained command). Automatic D. C.
Injection braking current at stop |
| Degree
of protection |
IP
20 for Heatsink & Plate versions, and IP 65 for Enclosed Version |
| Ambient
temp |
0
- 40° C without berating, deration @ 2.2% per°C above 40°C
(max. 60°C) |
| Operating
position |
Vertical |
200
to 240 v 50/60 Hz single-phase power supply :
|
Motor
Power
|
ATV
08 with
Heat Sink
|
ATV
08 On
Base Plate
|
ATV
08 In
I P65 Enclosure
|
|
KW
|
HP
|
|
0.18
|
0.25
|
ATV08HU05M2X
|
ATV08PU05M2X
|
ATV08EU05M2
|
|
0.37
|
0.5
|
ATV08HU09M2X
|
ATV08PU09M2X
|
ATV08EU09M2
|
|
0.75
|
1
|
ATV08HU18M2X
|
ATV08PU18M2X
|
ATV08EU18M2
|
Note
:
To
obtain a speed controller with EMC filter, delete suffix X from the reference.
Example : For 0.75 KW speed drive with EMC filter, order ATV08HU18M2
A
speed controller on a base plate requires some form of heat dissipation.
This can either be the machine frame or the heatsink projected outside
a dust and damp proof enclosure.
ALTIVAR
58
Dynamic
Power Control
Frequency
converter for 3-phase asynchronous motors :
Presentation
:
As
a frequency converter for 3-phase asynchronous squirrel cage motors, the
altivar 58 incorporates the latest technological developments such as
3rd generation Power Components, etc.
Robust
and compact, conforming to international standards, the Altivar 58 is
a modular product. Created from our experience of producing over several
generations of speed controllers, its functions meet the requirement of
the most up-to-date applications, such as :
- Material Handling
(conveyors, lifts, hoisting, etc.)
- Pumps & Blowers
(for energy saving)
- Packing &
Packaging
- Textiles (ring
frame, carding, combing)
- HVAC (heating,
ventilation & air conditioning)
- SPMs (Special
Purpose Machines)
Versions
:
The
Altivar 58 is available in three versions for ease of integration
into machines:
ATV-58HUXXXX Standard
speed controller with heatsink
ATV-58PUXXXX Speed controller with base plate
ATV-58EUXXXX Speed controller with IP55 / 65 Enclosure
Electromagnetic
Compatibility (EMC) :
EMC
filters are integrated into ATV58 upto 15KW. Beyond 15 KW rating. ATV
58 speed controllers are available with & without integrated EMC filters.
Incorporating filters into the speed controller facilitates machine installation
and conformity for CE marking purposes at low cost.
Version
with EMC filters conforms to EN61800 - 3 / IEC 1800-3 public and industrial
supplies.
Specifications
:
| Control Method |
Sensorless vector
control / upgradable for closed loop |
| Rated input Voltage |
200 to 240V ±
10% single phase / 380 to 500V± 10% three phase |
| Rated input Frequency
|
50 - 60HZ ±
5% |
| Output Frequency |
0.1 to 500 Hz |
| Over troque capacity |
200% for 2 sec
(transient) & 170% for 60sec. in high torque mode 140% for 2 sec
(transient) & 120% for 60 sec in standard torque mode |
| Braking torque |
30% without braking
resistor. Up to 150% with braking resistor |
| Control input
/ output |
- 4 logic inputs
in basic product + 2 logic inputs with I/O extn. card
- 2 Analogue
inputs in basic product + 1 Analogue input or
- Pulse encoder
input depending upon I/O card selected.
- 1 changeover
fault relay contact in basic product
- 1 PLC compatible
logic output & 1 Analogue output on I/O extn. card.
|
| Line choke |
Built in from
18.5 KW to 55 KW |
| Communication |
RS485 multidrop
serial link on simplified MODBUS in basic product Fipio, Modbus plus,
Unitelway-Modbus, Interbus-S & AS-i through comm. card. |
| Acc. / Dec. time |
0-3600 sec. (programmable
independently) |
| Switching Frequency |
Programmable
from 2.2 KHz to 8/12/16 KHz depending upon rating |
| Motor Protection |
Over load protection
(autoadjusting according to speed), out phase loss, PTC interface
with I/O extn. card. Thermal memory (40 min after power loss) |
| Speed controller
protection |
Short circuit,
over voltage, under voltage, earth fault, over temp. |
| Standard functions |
Preset speeds,
2/3 wire control, autotuning, job D.C. Injection braking, fast stop,
brake logic, down the line contactor control etc. |
| Degree of protection
|
IP 21 & IP
41 on Upper top for Heatsink & Plate version |
| Ambient temp. |
-10 to 40°C
with blanking plate & - 10 to 50°C without blanking plate
Derating above 40/50°C applicable @ 1.2% per degree rise in temp |
| Operating position |
Vertical |
Selection
chart for Altivar 58 (Heatsink version) :
|
MOTOR
POWER
|
HIGH
TORQUE
(CONSTANT
TORQUE)
|
STANDARD
TORQUE
(VARIABLE
TORQUE)
|
|
KW
|
HP
|
|
SINGLE
PHASE SUPPLY 200-240V, 50 / 60Hz
|
|
0.37
|
0.5
|
ATV58HU09M2
|
--
|
|
0.75
|
1
|
ATV58HU18M2
|
--
|
|
1.5
|
2
|
ATV58HU29M2
|
--
|
|
2.2
|
3
|
ATV58HU41M2
|
--
|
|
THREE
PHASE SUPPPLY 380-500V, 50/60HZ
|
|
0.75
|
1
|
ATV58HU18N4
|
--
|
|
1.5
|
2
|
ATV58HU29N4
|
--
|
|
2.2
|
3
|
ATV58HU41N4
|
--
|
|
3
|
-
|
ATV58HU54N4
|
--
|
|
5
|
5
|
ATV58HU72N4
|
--
|
|
5.5
|
7.5
|
ATV58HU90N4
|
--
|
|
7.5
|
10
|
ATV58HD12N4
|
--
|
|
11
|
15
|
ATV58HD16N4
|
--
|
|
15
|
20
|
ATV58HD23N4
|
--
|
|
18.5
|
25
|
ATV58HD28N4X
|
--
|
|
22
|
30
|
ATV58HD33N4X
|
ATV58HD28
N4X
|
|
30
|
40
|
ATV58HD46N4X
|
ATV58HD33
N4X
|
|
37
|
50
|
ATV58HD54N4X
|
ATV58HD46
N4X
|
|
45
|
60
|
ATV58HD64N4X
|
ATV58HD54
N4X
|
|
55
|
75
|
ATV58HD79N4X
|
ATV58HD64
N4X
|
|
75
|
100
|
|
ATV58HD79
N4X
|
Note
:
-
To
obtain a speed controller with integrated EMC filter delet suffix
X from the reference. Example : for 22KW speed controller with integrated
EMC filter the reference shall be ATV58HD33N4
-
To
obtain a speed controller without a operator terminal add suffix Z
to the reference Example : (a) for 4 KW speed controller without integrated
EMC filter and without an operator terminal, the reference shall be
ATV58HD33N4XZ
ATS46-SOFT STARTER
Presentation
:
Altistart
46 is a high performance, 6 Thyristor soft-start soft stop unit for controlled
starting of 3 phase asynchronous squirel cage motors. It provides :
- Controlled running
during starting & stopping
- Electronic thermal
overload protection
- Mechanical protection
to driven machine
- Increased life
to mechanical power transmitting gadgets
- Reduced stress
on power supply network
Specifications
:
| Controlled method |
Torque Control |
| Rated Input Voltage |
208V-10%..........240V
+ 10%, 380V-15%..........415V + 15%,
440V - 15%.........500V + 10% |
| rated Input Frequency |
50 / 60 Hz (self
- adaptable) |
| Nominal Current
|
17 to 1200 A
(The motor nominal current (In) is adjustable for
0.5 to 1.3 times the starter current rating) |
| Current Adjustment |
Maximum starting
current programmable from 2 to 7 times the motor nominal current,
limited to 5 times the starter current limit. |
| Control Inputs
/ Outputs |
3 Logic inputs
with 3.5K impedence. Power Supply 24V
2 Logic outputs, Max 40V, Min. 10V, Max output current 200ma,
1 Analogue output (0-20ma / 4-20ma), Precision ±3% linearity
±3% |
| Acc. / Dec. time |
1 to 60 sec (programmable
individually) |
| Motor protection |
Inbuilt Electronic
Thermal protection (selectable for starting classes
2, 10A, 10 15, 20, 25 & 30) |
| Starter Protection |
Short Circuit,
undervoltage, phase unbalance, phase failure |
| Standard functions |
Test on smaller
motor, cascaded starting of several identical different motors, starting
identical / different motors connected in parallel |
| Communication |
Multidrop bus
communication through interface on Unitelway, Modbus RTU/Jbus &
Modbus ASCII protocols. |
| Conformity to
standards |
IEC 947-4-2,
UL, CSA approved & CE marked |
| Degree of protection |
IP20 |
| Ambient temp. |
0°C to 40°C
without derating Above 40° C upto 60°C with derating
@ 1.2% per degree rise in temperature |
| Max. Relative
Humidity |
93% without condensation
or dripping water |
| Max. operating
altitude |
1000 meter without
derating. (Above this current derating applicable
@ 0.5% per additional 100meter) |
| Operating Position |
Vertical |
Unique
Features :
Apart from offering
TORQUE CONTROL, excellent bypass possibilities are available :
- For rating greater
than 22KW, separate set of terminals are integrated to terminate bypass
contractor cables.
- Electronic overload
relay integrated in ATS46 remains in ckt. even in bypass mode.
ZELIO
LOGIC :
Telemecanique
a logic module with total efficiency for multiple applications :
-
A
function blocks
-
8
different types of timers with permanent or rising edge (pulse)
command. Time base ranges from 1/10 sec to 100 hours.
-
8
four-digit counters (0 to 9999).
-
8
analogue comparators from 7 comparison types.
-
4
clocks, each with 4 time-setting ranges.
-
15
auxiliary relays
-
Parameter
setting
- This mode
allows the user or adjuster to display and modify the preselected
values of the various function blocks, eg: part number to be counted.
- This function
is possible while operation continues. (Run mode).
- Zelio Logic
allows display of 4 preselections in one screen.
-
General
characteristics
- 6 operating
languages available.
- 3-wire sensor
compatibility
- Possibility
of inputs acquisition time configuration.
- Capacity
to programme a minimum of 60 lines of command diagram
- A line comprises
3 contacts and a coil or 3 contacts and function block.
- 4 navigation
keys can be configured as 4"Z" pushbutton functions.
- External
backup on PC software or optional EEPROM cartridge.
-
Diagnostic
function
- This function
is accessible when the Zelio logic module is in operation.
-
Command
diagram date entry modes
- The "free
entry" mode is user-friendly and enables the user to 3 types
of operation;
- Zelio
symbols
- Ladder
symbols
- Electric
symbols
-
"Free
entry" also enables creating of mnemonics and comments associated
with each line of the programme.
-
Change
from one date entry type or mode to another is possible at any
time by a simple click of the mouse
-
Coherence
testing and application languages
- Zelio-Soft
keeps an eye on your application with its coherence test! This
means considerable timesaving, since at any data entry error it
changes to red. You need to click on to identify the problem
- Zelio-Soft
is an International product! It enables you not only to switch
at any time between the 6 application languages (English, French,
German, Spanish, Italian, Portuguese) but also to print the application
file in your chosen language. It allows you to select the representation
mode (Zelio, Ladder or Electrical) in which to edit the file.
-
Reduce
your debugging costs ?
- Zelio-Soft
allows you to test your programmes.
- Activate
discrete inputs and their contact modes, NO or NC, transient
or permanent,
- Display
output states,
- Vary
analogue inputs supply voltages,
- Activate
"Zi" pushbutton keys,
- Simulate
the application in real of accelerated time.
- Dynamically
display in red the various active elements of the programme.
-
Entry
of messages displayed on Zelio Logic
- Zelio-Soft
enables configuration of 4 text block, corresponding to 4 screens
of 4 twelve character line that can be displayed on all logic
modules.
for
more information visit at :
http://www.schneider-electric.co.in
TOP
|
Altivar
08
Altivar
58 Dynamic Power Control
ATS46-SOFT
Starter
Zelio
|
